SQ-Z23 23L table top autoclave steam sterilizer with best price

SQ-Z series damp heat quick sterilizer is our company dedicated to dental, ophthalmology,laboratory and other occasions require frequent sterilization design and manufacture,there are 18L, 23L and 45L of three models,for hospital or professional agencies sterilization.The sterilizer using microprocessor intelligent control,human-machine interface,easy operation, safe and reliable,clean sanitation.

 Humidity in sterilizing: ≥80%

Maximum pressure resistance: -120kpa~260kpa

Sterilization temperature: 121ºC-135ºC adjustable

Temperature display: LED digital

Microcomputer control technology: The sterilizer uses microprocessor intelligent control, human computer interface, easy to operate, safe and reliable. The parameters and status during operation are dynamically displayed through digital screen. Vacuum, water injection, heating, sterilization, pressure relief, exhaust, drying, power outage, automatic detection and alarm of abnormal work of equipment, automatic fault diagnosis, over temperature, over pressure automatic protection to ensure the reliability of sterilization. The buzzer automatically prompts the ENd display to complete.

Pulsation mode: Microcomputer control automatically selects pulsation times according to field conditions to ensure the coordination of temperature and pressure.

Vacuum mode: Three pre-vacuum to ensure faster heating, sterilization more thorough.

Safe valve: When the sterilizer pressure reaches 240 KPA ±5 KPA, the relief valve opens automatically.

Over-voltage protection program: When the sterilization chamber pressure reached 220 ±5 KPa, there were cues and automatic pressure relief.

Air leakage: When the sterilizer is tested at each stage, the pressure rise rate should not be greater than 0.13 KPA / min.

Sterilizing chamber dynamic pressure: The pressure variation during the sterilizer cycle should not exceed 1000 KPA / min during any 2 s interval.

Vacuum pump: The utility model adopts double head oil-free vacuum pump with leather bowl, which is simple and convenient, has fast vacuum rate, long service life, and ensures that the vacuum degree can reach -80 kpa.

Pressure sensor: The inner pressure sensor automatically detects the pressure inside the cavity to ensure the accuracy and efficiency of the pressure.

Temperature sensor: The built-in temperature sensor automatically detects the temperature inside the cavity to ensure that the temperature in the cavity is within the accurate range of ±3 ºC.

Sterilization mode: Bare equipment, cotton yarn, wrapping equipment, plastic and rubber equipment products, the default working temperature is 135 ºC.

Sterilization time at 135 ºC: 36 minutes (12 minutes for preheating, 4 minutes in vacuum, 4 minutes for sterilization, 16 minutes for drying)

Sterilization time at 122 ºC: 56 minutes (preheat 8 minutes, vacuum 4 minutes, sterilization 5-20 minutes, dry 20 minutes)

Automatic drying: Strong vacuum drying, suitable for different items drying requirements; equipment residual humidity < 0.2.

Steam discharge: Built-in condensate water collector, waste steam condensed by condenser after removal, do not exhaust waste steam, more safe and clean.

Hermetically-sealed construction: Sealing ring for silica gel products, design life of 2 years or 1200 times) not aging and not deformation.

Quick-wear part: Sealing ring

Alarm system: High and low temperature alarm system

Category: Class II medical devices