Product name: Respirator N95-V1

Specifications: Folding type  11.5cm × 15cm

Structural composition: 

The medical respirator mask is composed of surface layer, filter layer, inner layer, nose clip and elastic cord, etc. The materials of the surface layer and the inner layer are Spunbond non-woven fabrics, and the materials of the filter layer are meltblown non-woven fabrics and the material of the elastic cord is made of the braided polyester thread and the nose clip is made of the bendable and shapeable metal.

Performance:

1. The appearance of the product should be clean, no obvious dirt, no odor and color difference, and soft. The surface should not be damaged, cracked, and it should be intact and straight, etc. No deformation or other obvious defects are allowed.

2. Filtration efficiency≧95%;

Contraindications: 

It is forbidden for those who are allergic to materials.

Use method:

1. Open the package, hold the medical respirator on the face with one hand, and fix the face with the nose clip on the back.

2. Pull the lower mask strap over the top of the head and place it under the ears behind the neck; pull the upper elastic cord over the top of the head and place it above the top of the head.

3. Put the tips of your two fingers on the nose clip, starting from the middle position, press the nose clip with your fingers pointing inward, and move and press to the sides respectively to shape the nose clip.

4. Check the tightness of the edge to obtain the best protection effect.

Product performance:

1. The mask should cover the wearer's mouth and nose, and should have good facial adhesion. There should be no holes or stains on the surface, and there should be no exhalation valve.

2. Masks should be equipped with nose clips, which should be adjustable.

3. The mask elastic cord should be easy to adjust. It should have sufficient strength to fix the position of the mask. The breaking strength of the connection point between each mask elastic cord and the mask body should not be less than 10 N.

4. The filtering efficiency of masks for non-oily particles should be ≥95%.

Contraindications:

Those who are allergic to the ingredients of this product are prohibited.

Warnings:

1. This product is a disposable medical device.

2. The use of damaged packaging is prohibited.

3. The product should be used as soon as possible after opening.

4. This product is recommended to be used for a maximum of 8 hours, please destroy it after use.

5. Please check the tightness when you wear a medical protective mask and enter the work area each time.

6. The mask should be replaced in time after being contaminated by the patient's blood and body fluids and wet.

7. Dispose of the product as medical waste after use.